Kosin store backup car camera

www.etrailer.com Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information. Today on this 2008 Dodge Grand Caravan we are going to install brake controller and we are going to be using part number 5520 the Activator 3 from Draw-Tite. We are going to be using a bracket part number 118136 from Tow Ready and we are going to be using brake controller install kit part number ETBC7. We will begin our install by installing our bracket on the hitch and we will clamp it into place using the supplied clamp. Next we will take the 7-pole bracket and install that next onto the bracket that we just did. Next thing we need to do is prepare the 7-pole that comes with the ETBC7 kit and get it ready to install in our bracket. What we are going to do next is connect our gray cable to our 7-pole cables so basically we are going to strip this back and make our connections. We are going to hook this black to black, and this black wire is going to go straight up to the battery for our 12 volt power supply and that is it. This white wire is going to go to the blue wire that is going to go to our brake controller so when we go back up to the brake controller this white wire will go back up to the blue. 01:03 Tape that up then put the loom material on. On the purple wire actually goes to the reverse light lead, if the trailer needs it all you need to do is run it to your reverse light behind one of the tail lights and just make the ...