Kosin store backup car camera

www.etrailer.comVideos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information. Here is a video of a Draw Tite custom hitch installation on a 2007 Dodge Charger. You can have a cool car and be able to tow toys. For road trips you can use a cargo carrier allowing more room inside to spread out and be comfortable. For trips to the beach you can pile on coolers and chairs. Bike enthusiasts can drive to the trails in comfort while the bikes are safely secured to a hitch mounted bike rack. There are really so many things a receiver hitch will allow! Today we are going to install part number 36325 which is a Draw-Tite Class II Trailer Hitch. We are installing it on a 2007 Dodge Charger RT model. First thing in installing the hitch is getting to the frame. The exhaust makes it really tight up here so we have to lower the exhaust by pulling off the rubber hangers and lowering it. So that we have more room to put the hitch up in there. First thing you want to spray it down with some WD40, make sure you get it worked in there real good. It is very tight even to just get a tool in there to pry it off. The back hanger we will just have to unbolt. Turns out on the passenger side there is not as much clearance as we needed. So we are going to go ahead and take down this exhaust hanger and that other one too. On the driver side we will start off by pointing out the access points. We are going to thread into this hole here. On this ...